DriveAxis Industrial Automation Blog

Blog

Your Motor Load Just Doubled — Can the VFD Follow?

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Delta VFD — You sized a 5.5 kW (7.5 hp) fan drive at nameplate. Then the process engineer added a second-stage pump: now the same shaft sees 9 kW peak, sometimes 11 kW transient. [...]

Continue Reading →

Posted in Blog

Blog

ABB vs Danfoss VFD: When the Load Doubles — Which Drive Keeps You Out of Trouble?

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Danfoss VFD — You sized a drive for a pump running 37 kW at 110% overload. Good. Then the process engineer adds a second pump on the same line, same motor, same duty — but now the total load on the feeder sometimes hits 68… [...]

Continue Reading →

Posted in Blog

Blog

ABB ACS580 vs Delta MS300 on a Noisy Generator Feed

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Delta VFD — Every month I hear the same assumption: “A cheaper drive on a generator feed—what could go wrong? [...]

Continue Reading →

Posted in Blog

Blog

ABB vs Danfoss VFD: On a Noisy Generator Feed – Head-to-Head Teardown

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Danfoss VFD — The myth that any industrial VFD handles a generator feed equally costs plants thousands in unplanned downtime. [...]

Continue Reading →

Posted in Blog

Blog

ABB vs Delta VFD: Which One Survives a Tight-Cooling Shelter?

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Delta VFD — You're sizing a VFD for a shelter that barely has 500 CFH of forced air — same cabinet that holds the fan fails to keep ambient below 45°C on a 35°C day. [...]

Continue Reading →

Posted in Blog

Blog

ABB vs Danfoss VFD: for a Tight-Cooling Shelter

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Danfoss VFD — Picture a 12-rack mobile shelter, 38 °C ambient, no conditioned air loop — just fan-driven ventilation through the inverter section. [...]

Continue Reading →

Posted in Blog

Blog

“The overload rating is all that matters” — until one part fails first

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Delta VFD — You’ve read it on forums: “Delta MS300 gives you 150 % for 60 s in heavy duty — that’s more torque headroom than ABB.” The claim sounds decisive, but it ignores which component actually reaches its thermal… [...]

Continue Reading →

Posted in Blog

Blog

“The input choke is already inside — you’ll never need an external line reactor.” Really? That’s the spec that fails first on a real line.

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Danfoss VFD — Every VFD salesman has said it: “Our drive has a built-in choke — you’re covered.” The claim sounds bulletproof. [...]

Continue Reading →

Posted in Blog

Blog

ABB vs Delta VFD: The Five-Year Total Cost That Caught Me Off Guard

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Delta VFD — You're about to pick a VFD for a production line that will run 16 h/day, 5 days a week. The difference between a drive that loses 3 % of input energy as heat and one that loses 5 % doesn't sound like much —… [...]

Continue Reading →

Posted in Blog

Blog

ABB vs Danfoss VFD: The Five-Year TCO Trap Most Spec Sheets Hide

Posted on Wednesday 17th of June 2026 by Jane Smith

ABB vs Danfoss VFD — You commission a 90 kW pump drive. The purchase order shows a 12 % price premium for the ABB ACS880 over the Danfoss FC 302. [...]

Continue Reading →

Posted in Blog